Here is what you’ll need!
TERRA-COTTA BBQ SMOKER
SUPPLIES
2 16-inch terra cotta flower pots
Adhesive gasket tape
U-hook
4 nuts
4 washers
Power drill
Thermometer
Brick
10-inch grill grate
14-inch grill grate
Charcoal briquettes
Wood chips
INSTRUCTIONS
1. Start with the lid. Take one flower pot and line the rim with gasket tape. This will create a good seal.
2. Flip it so the bottom side is up. Take the U-hook and mark the 2 points then drill a hole so it will fit through. Make sure to start with a smaller drill bit and work your way up. The drill bit heats up and may crack the clay pot so have water to cool off the drill bit and hole.
3. Place a nut and washer on each end of the hook and thread it through the holes.
4. Carefully flip the pot on its side and place washer and nut to secure the U-hook. Once it is secured it will become your handle.
5. Flip it upright and drill a hole in the middle of the pot that is small enough for the thermometer to fit through.
6. Take the other pot and line the rim with gasket tape.
7. Drill 2 air vents on the bottom. This will be your base.
Place a brick down which will help raise the grate, or find a larger grill grate that will rest along the sides.
8. Place hot coals and wood chips on top of the bottom grate.
9. Add the larger grate on. Get your smoker to the right temperature and place your proteins on your grill and enjoy a nice smokey flavor! 10. You can also not use wood chips and use it as a regular grill!
Check us out on Facebook! – facebook.com/buzzfeednifty
Credits: https://www.buzzfeed.com/bfmp/videos/24002
MUSIC
Summers On The Block_NoBlMel
Licensed via Warner Chappell Production Music Inc.
source
